The Right Way Of Operating SINUOUS P80
How to use:
1. Power on/off: Push forward the battery cover and put one 18650 cell into the battery body. Press the fire button 5 times in quick succession to turn the device on and off.
(Note: Please adjust the wattage to a proper range to match the atomizer you used before using. Moreover, please be careful not to use battery with torn shell for safety.)
2. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.
3. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock function.
4. Micro USB port function: The USB port can be used for charging and upgrading firmware. It is better to take out the cell and charge it through external charger.
5. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. You can then view the screen from two kinds of angle through this operation.
Shift among VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode of the Wismec SINUOUS P80 Kit
1. Press the fire button 5 times to turn the device on.
The OLED screen presents 4 rows of information:
(1). Mode (VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR) and Battery indicator
(2). Temperature in TC modes or Output wattage in VW/Bypass mode.
(3). Output wattage in TC modes or Voltage in VW/Bypass mode.
(4). User information (Current, Puff, Time) and Resistance
2. Press the fire button 3 times, the mode indication will flash to indicate you enter into the menu. Press the right regulatory button to switch between VW, Bypass, TC-Ni, TC-Ti, TC-SS and TCR mode. Press the fire button, or leave the display to flash 10 times on the current setting to confirm and exit the menu.
1. Power on/off: Push forward the battery cover and put one 18650 cell into the battery body. Press the fire button 5 times in quick succession to turn the device on and off.
(Note: Please adjust the wattage to a proper range to match the atomizer you used before using. Moreover, please be careful not to use battery with torn shell for safety.)
2. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.
3. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock function.
4. Micro USB port function: The USB port can be used for charging and upgrading firmware. It is better to take out the cell and charge it through external charger.
5. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. You can then view the screen from two kinds of angle through this operation.
Shift among VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode of the Wismec SINUOUS P80 Kit
1. Press the fire button 5 times to turn the device on.
The OLED screen presents 4 rows of information:
(1). Mode (VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR) and Battery indicator
(2). Temperature in TC modes or Output wattage in VW/Bypass mode.
(3). Output wattage in TC modes or Voltage in VW/Bypass mode.
(4). User information (Current, Puff, Time) and Resistance
2. Press the fire button 3 times, the mode indication will flash to indicate you enter into the menu. Press the right regulatory button to switch between VW, Bypass, TC-Ni, TC-Ti, TC-SS and TCR mode. Press the fire button, or leave the display to flash 10 times on the current setting to confirm and exit the menu.
No comments