Vzone Graffiti Protections
1. Over Puffing Protection:
Device will deactivate after prolonged continuous puffs of more than 10 seconds. The screen will flash!!Long Vaping!!
2. Low-Voltage Protection:
When the voltage/power is too low, the screen will display “Low Battery.” Please recharge the device.
3. No Atomizer Protection:
If no atomizer in attached to the device, the screen will display “No Atomizer”
4. Atomizer Short Protection:
The device has internal controls to protect against atomizer short.
With KA coil, resistance below 0.1ohm.
With Ti/Ni200/SS316 coil, resistance below 0.05ohm.
5. Reverse Connection Protection:
If batteries are inserted incorrectly, the device will not power on and will prevent any damage to the chipset.
6. Automatic Power Adjust Protection:
Using the device will under high wattage situations when the battery is at low voltage/power conditions, the battery sign will flash continuously and will auto adjust the output wattage power to be used in safe normal modes.
7. Temperature Alert:
If the internal board temperature becomes excessive, the output will shut off automatically and the screen will display “TOO Hot, please wait 15s!”.
8. Temperature Protection:
In TC modes, if the actual temperature of coil exceeds the set temperature, the device will shows “Temp protect”.
No comments